主管单位:中华人民共和国工业和信息化部
主办单位:西北工业大学  中国航空学会
地       址:西北工业大学友谊校区航空楼
气动式座舱压力调节器高原机场适应性设计研究
DOI:
作者:
作者单位:

1.航空工业新乡航空工业集团有限公司;2.航空工业新乡航空工业集团有限公司 研发设计院

作者简介:

通讯作者:

中图分类号:

V271.4

基金项目:


Adaptability Design and Simulation Study of Cabin Pressure Regulator for High Altitude Airports
Author:
Affiliation:

R D and Design Institute,AVIC Xinxiang Aviation IndustryGroup Co.,Ltd

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    战斗机典型气动式座舱压力调节器在高原机场条件下使用时存在座舱压力变化速率过大的问题。提出一种在排气活门控制腔上增加一个由高速电磁活门控制的排气旁路的解决方案,分析该方案的工作原理,建立了座舱压力调节系统的数学模型,设计座舱增减压速率控制律,在MATLAB/Simulink 软件平台上进行高原机场条件下座舱压力调节系统动态特性计算,并开展地面模拟试验。结果表明:通过合理的座舱增减压速率控制律设计,高速电磁活门既可以实现增压飞行过程中座舱增压速率的有效控制,又可以实现高原机场着陆阶段座舱减压速率的有效控制,所提解决方案有效。

    Abstract:

    In response to the problem of excessive cabin pressure rate of change when using typical pneumatic cabin pressure regulators for fighter jets under high altitude airport conditions, this paper proposes a solution to add an exhaust bypass controlled by a high-speed solenoid valve to the outflow valve control chamber. The working principle of this solution is analyzed, a mathematical model of the cabin pressure regulation system is established, and a control law for cabin pressure increase and decrease rate is designed, The dynamic characteristics of the cabin pressure regulation system under high altitude airport conditions were calculated on the MATLAB/Simulink software platform. The calculation results showed that through a reasonable design of the cabin pressure increase and decrease rate control law, the high-speed solenoid valve can effectively control the cabin pressure increase rate during the pressurized flight process and the cabin pressure decrease rate during the landing stage of the high altitude airport, verifying the effectiveness of the proposed solution.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2024-01-09
  • 最后修改日期:2024-03-26
  • 录用日期:2024-05-07
  • 在线发布日期: 2025-02-24
  • 出版日期: